Most of us are familiar with weather and know that it is not consistent every year, and rain doesn’t always come when farmers need it. This is why some large fields resort to using some kind of irrigation system. Even though you may see a large irrigation system while driving down the road, it is helpful to note that most of Iowa’s cropland is not irrigated. According to the USDA, other states outside of the Midwest, such as California, Nebraska, Arkansas, and Idaho, rely more heavily on irrigation systems. This is due to their irregular and infrequent precipitation.
Using this method of irrigation systems to water crops, farmers can control their crops’ water requirements if there is not enough rainfall. Like many things in the agriculture industry, the control of these irrigations systems can be automated and can be done right from the farmer’s phone or tablet. With different technologies, farmers can adjust the water pressure, the amount of water, and more without even being on the field, similar to how you could control your home’s security or temperature with smart technology while being on the road. As advanced as this may seem, these irrigation systems continually advance with the rest of the agriculture industry with solar-powered irrigation systems being implemented more widely in the future.
When deciding what kind of irrigation system to use, farmers have several choices: sprinkler vs. drip and center pivot vs. linear.
sprinkler irrigation system:
This system imitates rainfall by distributing the water above the field surface, allowing it to fall on the crops and soil. All plants on the field should receive the same amount of water, hopefully resulting in similar growth. This system is one of the most popular kinds of irrigation, and you probably have seen them in the fields at one time or another. This system is also similar to what many homeowners use to water their lawns. Like every system, sprinkler irrigation has some advantages and disadvantages. A farmer may decide to go with the sprinkler system because of the reduced cost of overall farm labor and reduced soil erosion. Another farmer may opt out of sprinkler irrigation because of the high initial cost of pipes, motors, and installation, and because of the high water loss due to evaporation.
drip irrigation system:
Compared to a sprinkler system, the drip irrigation system can be more efficient than a sprinkler system because the water is being dripped from a lower point, drop by drop (there is less evaporation water loss). With this kind of system, the soil soaks in the droplets before they can evaporate or be blown away by the wind. The water is applied closer to the roots where it is truly needed. Although drip irrigation may seem like the more beneficial choice, there are some downfalls, including that the water outlets get clogged because they are in direct contact with the ground. These systems also take a lot of training to understand the machine and manage the system.
center-pivot irrigation system:
This type of sprinkler irrigation is just what it sounds like: a mechanical system that moves in a circle with a center point. This machine can also be used to apply fertilizers and pesticides. The chemicals are mixed into the water as the water is sprayed onto the field. This multipurpose system can be used on a variety of crops, including vegetables and fruit trees. The center point is usually a permanent, stationary point where the water is pumped up from an underground well. The long arm of the system stretches across half the field and as it moves in a circle, it waters the entire field. The arm is supported by large wheels that travel across the ground and hold the arm up. If you’ve traveled in a plane over Midwest states like Nebraska, Kansas, and Colorado and looked out the window, you’ve likely noticed the circular fields. Each one of those fields has a center-pivot irrigation system on it.
Linear Irrigation System:
Linear irrigation systems are marketed to irrigate 98% of the field by traveling across the field in a straight line, forward, and reverse working best in square or rectangular fields. This system is another example of a sprinkler system. The water used is either taken from underground or a hose that drags behind the machine’s wheeled cart. In a linear irrigation system, soil compaction is reduced. It is also easier to work in windier conditions, unlike the center-pivot system because they are lower to the ground. Center-pivot systems can work on tall crops like corn. Linear irrigation system are better for shorter crops like alfalfa.
Now that we know what types of irrigation systems are out there, the final question is, why use them? With this kind of technology, crops can be watered in a controlled environment where the lack of rain can be less of a burden on farmers and their yield. Controlling the amount of water applied in a slow and steady manner can lead to less runoff and erosion. Plus, the time that farmers would typically take using more complex kinds of irrigation can now be spent perfecting other areas of the field or farm operation.
Next time you see one of these systems as your driving down the road, now you will have a better idea of what it does! If you’re a farmer, let us know in the comments what works best for you!
Hi! My name is Madison Paine and I am the education programs intern at IALF for the next year. I am currently a junior at Iowa State University studying agriculture communications. I grew up on an acreage outside of Maxwell, IA where my love for agriculture first sparked. I am very excited to be here and can’t wait to see what this next year all entails!